《化学和黏合》
 
报目录
报介绍
 
 
 
 
  目前位置: 《化学和黏合》>>报目录

2018年 先后5希望

催化重整装置预加氢反应器压降大的原因分析和解决办法
张士元,王艳永,杨立新
(中石油 克拉玛依石化有限责任公司,新疆 克拉玛依 834003)
选择 如果:针对催化重整装置预加氢部分压降大的原因概括分析并提出解决方案,察觉采用自动反冲洗过滤器可以有效解决这个题目,结果表明:过滤器运行良好,先加氢反应器压降稳定在60~80kPa,解决了先加氢反应器压降快速上升的题材,调减装置停工和栏式过滤器清洗的频次,取得好的过滤效果与较大的经济效益,保持了装置的长周期运行。
关键词:机动反冲洗过滤器;催化重整;先加氢;压降
  受到图分类号:TE 96 文献标识码:B 文章编号:1001-0017(2018)05-0379-04

The Analysis of Causes to the Large Pressure Drop in Pre-hydrogenation Reactor of Catalytic Reforming Unit and the Solution to It

ZHANG Shi-yuan, WANG Yan-yong and YANG Li-xin

(PetroChina Karamay Petrochemical Co., Ltd., Karamay 834003, China)

Abstract: A brief analysis of the reasons for the large pressure drop in the pre-hydrogenation of the catalytic reforming unit and some solutions are proposed. It is found that the use of an automatic backwash filter can effectively solve this problem. The results show that the filter works well and the pressure drop of the pre-hydrogenation reactor is stable which is 60~80kPa, and the problem of rapid pressure drop of pre-hydrogenation reactor is solved; the frequency of device shutdown and column filter cleaning reduced. A good filtration effect and terrific economic benefit is achieved, and a long-period operation of the device is ensured.

Key words: Automatic backwash filter; catalytic reforming; pre-hydrogenation; pressure drop

  如果要全文请与编辑部联系。联系方法:0451-82608722